Pre-flashed with Zigbee coordinator firmware based on EZNet 6.10.3 out of box

Support smart home platforms like Home Assistant, openHAB, Zigbee2MQTT and so on

Based on EFR32MG21

+20dBm output gain

Aluminum housing effectively reduces signal interference from peripherals

SONOFF Zigbee 3.0 USB Dongle Plus can works with the devices below:

Router: ZBMINI R2 smart switch, S40 Lite ZB, S31 Lite ZB smart plug, S26R2ZB smart switch

End Device: ZBMINI-L2 smart switch, SNZB-01P switch, SNZB-02P Temp. and Hum. sensor, SNZB-03P motion sensor, SNZB-04P door/window sensor

SONOFF ZBDongle-E is a universal Zigbee USB stick. It can be used as a Zigbee gateway in Home Assistant, openHAB, Zigbee2MQTT, or other open-source platforms to locally control all your Zigbee devices, so you don't need to invest in different brands' Zigbee hubs, all you need is a universal gateway – ZBDongle-E!

The dongle plus has a wide range of supported devices, such as ZBMINI-L2, SNZB01P, SNZB02P, SNZB03P, SNZB04P, SNZB05P,SNZB06P,S26R2ZB, S40 LITE ZB. Dongle Plus is pre-flashed with coordinator firmware, you can also flash router firmware to extend the network range.

Dongle Plus support a variety of common systems, like Linux, Ubuntu, Raspbian, Windows, macOS (Windows and macOS require corresponding driver installation).

Raspberry Pi (Linux) is recommended, if you use Windows or macOS, you need to install Driver first.